AGIBOT D1 MaxPro Quadruped Robot | High Load & Mobility, Autonomous Patrol and Environmental Perception for Industrial Inspection and Emergency Rescue
1. Key Advantages 1) High Payload: Can stably carry a 50 kg effective payload for extended periods, meeting demands for heavy-mounted equipment, ultra-heavy transport, and material handling. 2) Reliable Endurance: Equipped with a 2160 Wh high-capacity battery with high energy conversion efficiency; can operate continuously for 2.5 hours under rated payload and up to an industry-leading 5.5 hours with no load. Supports quick-release battery swapping and offers an optional autonomous charging dock. 3) Excellent Mobility: Highly maneuverable with strong all-terrain adaptability; can climb continuous stair steps up to 30 cm and navigate perforated industrial stairs. Features a mature fall-detection and self-recovery mechanism. 4) Strong Environmental Adaptability: IP67 industrial protection rating; operates reliably in a wide temperature range from -20°C to 55°C and in water up to 20 cm deep. Resistant to extreme cold, heat, wind, and rain to ensure dependable operation in harsh natural conditions. 2. Specifications Standing Dimensions (L × W × H): 1230 mm × 530 mm × 730 mm Gross Weight: 68 kg Battery Module: Rated capacity 45 Ah, voltage 48 V Autonomous Charging: Optional Top Speed: 3 m/s No-load Endurance: 5.5 h Payload Endurance: 2.5 h Effective Payload Range: 13.5 km Maximum Load: 70 kg Effective Payload: 50 kg Maximum Climb Angle: 45° Maximum Continuous Stair Height: 30 cm LiDAR: 1 unit Operating Temperature: -20°C to 55°C Ingress Protection: IP67 Expansion Interfaces: Gigabit Ethernet port, USB port; power outputs: 12V/24V/48V, total power 720 W 3. Application Scenarios 1) Energy & Chemical Inspection: Replaces human entry into high-risk areas such as flammable, explosive, or toxic zones. With mounted sensors, it performs around-the-clock safe inspections of storage tanks, pipelines, and instruments, reducing personnel exposure to hazards. 2) Ultra-heavy Transport: Capable of carrying a 50 kg effective payload while easily climbing stairs, slopes, and complex terrain—solving material transport challenges in mountainous areas, scenic spots, and construction sites without elevators. 3) Emergency Rescue: Enters hazardous scenes that are difficult for rescuers to access—such as fires, collapses, and toxic leaks—to stream live footage, detect vital signs, and carry emergency supplies for rescue operations. 4. Materials & Maintenance 1) Materials Main frame: aviation-grade aluminum alloy for light weight and high rigidity. Shell: weather-resistant engineering plastic that is corrosion- and scratch-resistant. Foot pads: highly wear-resistant, anti-slip rubber. Fully sealed design with IP67 water and dust protection; can be washed directly. 2) Maintenance Daily: Rinse the body with clean water, remove debris from foot pads, and dry connectors. Periodic: Monthly check and tighten screws, clean LiDAR; quarterly lubricate the joints. Storage: Remove the battery and keep it at 50%–60% charge; perform one charge/discharge cycle per month for maintenance. Cautions: Avoid flushing precision connectors; do not overload; do not forcibly bend joints; do not disassemble internal structures.
